Yes, multiple GridBoxes can be paralleled together to reach the desired kW output and/or kWh capacity. When deploying more than (1) GridBox on the same system a master controller is required. The customer can use a 3rd party master controller to monitor the GridBox systems.

All 10GB-0100 GridBox products have inherent PV DC coupling capabilities. PV Solar kWdc capacity is 200kWdc, Max voltage 900Vdc. Other configurations are possible based on project specific needs

All GridBox products are PV AC coupling capable. However, when operating GridBox with AC coupled PV in Grid Island (standby mode) operation a Microgrid controller is required. The controller will choreograph when to discharge/charge GridBox and when to curtail PV solar production when GridBox is fully charged, and facility load does not exceed PV solar kW output. Also please note, an appropriately sized electric panel or switchboard, external to the GridBox, will be required to provide breaker or fused switches to allow all sources to parallel with each other.

Yes, Lithion Battery offers the GridBox EAM. The EAM includes a gateway device and Data Aggregator with onsite data storage. The Gateway device acts as a firewall and interface between the Lithion Battery 24/7 command center that monitors BESS installations 24/7 and the Data Aggregator. The Data Concentrator polls data from each GridBox at a high rate to capture operational change of state and analog values. That data is then analyzed at the site to consolidate key trouble alarms, failure alarms, temperature values, operational status, etc to reduce the amount of data streamed through the gateway device to the Lithion Battery 24/7 command center. Data sets will be updated at the Lithion Battery 24/7 command center every 15 minutes. Any trouble or failure alarms will trigger an event report that contains high resolution data capturing of pre-events leading up to the triggered event. The Algorithm in the Data Concentrator will issue pre-fault maintenance alarms to notify customers of predicted failures such that maintenance contractors can fix/replace components before they fail during the normal quarterly maintenance interval. Predicted failure alarms also allows customers to resolve issues before they occur to better guarantee BESS uptime.

Yes, our warranties are customizable with full augmentation options available.

Lithion Battery is currently developing the next generation of functionality in pre-integrated battery energy storage products. While still confidential, we plan to announce our new products Q1 of 2024.

FAQs